Operating manual LED magnifying Lamp
28 / 32
EN
4.4 Switching on and brightness control
You can switch your LED magnifying lamp on and off using the flip switch (1, Figure
5) even when the cover is closed. Brightness is controlled by tapping the sensor
fields (brighter: 2, darker: 3, Figure 5).
You can adjust the brightness in 6 levels.
ATTENTION
Avoiding unnecessary power consumption.
`
Although your LED magnifying lamp only consumes a small amount of
energy, we recommend disconnecting the power supply unit from the
mains power outlet during prolonged periods of not being used!
4.5 Ambient conditions
Only
use the LED magnifying lamp indoors.
Ambient temperature -20 °C to 40 °C; humidity ≤ 95 %.
5
Care, maintenance and troubleshooting
5.1 Cleaning
ATTENTION
Material damage to the magnifying lamp
`
Do
not
use any aggressive cleaning agents, abrasive cleaning
sponges, chemicals or the like for cleaning.
Clean the lens and lens cover regularly with a soft, lint-free cloth. Wet it slightly with
water if there is lots of dirt.
Figure
5
Lamp head of the LED-Lupenleuchte
②
①
