Operating manual LED magnifying Lamp
27 / 32
EN
③
4.3
Alignment and joint adjustment
You can align and adjust the LED-Lupenleuchte individually to your working require
-
ments. The following alignment options are available:
Figure 4
Setting up the LED-Lupenleuchte
A) Tilting the head
Loosen the fixing screw (4, Abbildung 1), set the desired angle and retighten the fix
-
ing screw.
B) Rotating the head
You can tilt the lamp head vertically by 180 degrees and position it as desired.
Please never force it to rotate beyond where it is designed to!
C+D) Joint adjustment
You can position the lamp head anywhere within the range of the joint. Do
not
move
the joints against the intended direction of rotation.
The arm is balanced to the respective weight of the lens and does not need to be
additionally fixed. It is therefore important not to change the weight when replacing
the lens.
