Before using your new Mini lectern with magnifi er for PCB, please
read this instruction manual to prevent any damage. Put it away in
a safe place for future references.
IMPORTANT
Use a soft damped cloth to clean the magnifi er lens.
PACKAGE CONTENT
1 metal base
2 arms
2 holders
1 magnifi er
HOW TO ASSEMBLE THE MAGNIFIER AND THE ARMS
When you open the package, you will see 4 pieces; to assemble them,
follow next steps:
1.- Place the metal base in a fl at and secure surface.
2.- Take one of the holders and turn the secure counterclockwise to
open it.
3.- Place one side of the holder into the magnifi er base.
4.- Place the magnifi er into the holder.
5.- Turn the secure to the right to fasten the magnifi er and the base up.
6.- In the same way, take the next holder and place the arms into it and
the base. Fasten tight it up to avoid detachments.
•
•
•
•
7.- Now you can use the device.
The secures can be released to place the magnifi er and the arms
in the required position.
Specifi cations and features are subject to change without notice.
Before using your new Mini lectern with magnifi er for PCB, please
read this instruction manual to prevent any damage. Put it away in
a safe place for future references.
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the
original purchaser for one year from the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase ticket, product box or package,
and product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty service,
at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow
enclosed instructions, improper repair by unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your nearest dealer. If you are in
Mexico, please give a call to our Call Center.
Call Center
01 800 500 9000
Product: Mini lectern with magnifi er for PCB
Part number: HER-700
Brand: Steren
The secures can be released to place the magnifi er and the arms
in the required position.
Specifi cations and features are subject to change without notice.
