TS254SW 11
Assembly Instructions
To adjust the alignment of the splitter
WARNING:
To prevent personal injury, always
unplug the saw from power source before make
any adjustments.
The splitter must be precisely in LINE with the
saw blade. Loosen the two screws (a), align the
splitter with the saw blade. Once aligned, hold
the splitter.
Assembling the Protective Cover
– Place protective cover (
1
) above the splitting
wedge (
14
), so that the screw fits into the slit of
the splitting wedge.
– Push the Protective cover (
1
) in to the bottom
of the opening.
Adjusting the extension table and
extension rail
The extension table can be opened and closed by
the locking handle (5).
When the locking handle is in the “DOWN”
position the extensions table is locked in place
(see Fig. G1).
When the locking handle is in the “UPPER”
position the extensions table is free to be adjusted
(See Fig. G2).
Open the extension table when you need
(See Fig. G3).
Summary of Contents for TS254SW
