ISR 12-LO/GS Manual
Settings / Parameter Descriptions
•
23
4
Settings / Parameter Descriptions
All setting keys and switches for operation the instrument are placed inside the
housing and can only be used after removing the cover (four screws). Ex works the
instrument is operating in pouring stream mode (setting of other modes only via
software InfraWin, see Chapter
5
,
Software
InfraWin
).
4.1
Factory Settings
Pouring stream mode = On
Start-up condition = 50%
Pre-run time = 0.5 s
Measuring time = 0 (auto)
Follow-up time = 0.5 s
Temperature display (°C / °F) = °C
Emissivity slope (
K
) = 1.000
Emissivity (
ε
) = 1.000
Exposure time (t
90
/ s) = 0.00
Clear time (t
Clear
) = 0.00
Analog output (
0 / 4 mA
) = 0 ... 20 mA
Sub range same as basic temperature range
Address = 00
Baud rate (
kBaud
) = 19.2 kBd
Measuring mode (
1 / 2 / M
) = 2
Switch-off level (
OFF / %
) = 10%
Interface (
RS485 / RS232
) = RS232
