LUXOR
14 V tap
15 V
C
omm
on
Watts shown are per 12 AWG (2.05 mm) cable. Install
additional cable runs as needed to complete the project.
To increase the wattage maximum, run 8 AWG (3.26 mm)
or double 12 AWG (2.05 mm) to the first luminaire in the
zone. Use a digital voltmeter to fine-tune the circuits.
Out There Zone
120 to 160'
(36.6 m to 54.9 m)
LED 110 W max.
9
Installing the Controller
Summary
For maximum light output and LED life, each luminaire should be
provided with 10 to 15 V.
Cable Stats
Low-voltage lighting systems are typically installed using
direct-burial-rated stranded cable. The most common cable used
is 12/2 AWG (2.05 mm) stranded cable. The size of cable used to
wire the lighting system will be determined by the wattage load
and length of cable run from the transformer to the luminaires.
Keep in mind that all low-voltage cable has a maximum rating.
Overloading cable can create a dangerous safety hazard, so be
sure to choose the proper cable size for your lighting system.
Figure 5: Wiring example
Summary of Contents for ZDClink Luxor SATlink
Page 39: ...39 Notes ...
