28
Controller Linking Setup
Chassis Communication and Assignment
1. Apply power to the primary controller.
2. On the facepack
Diagnostics
screen, verify that the primary
controller has been “Assigned” and is “Communicating.”
The assigned chassis numbers do not always
correspond with the installed primary and satellite
controllers shown on the display.
3. Apply power to the satellite controllers.
4. On the facepack
Diagnostics
screen, verify that the satellite
controllers have been “Assigned” and are “Communicating.”
Before proceeding, confirm that the number of total chassis
assigned and communicating is equal to the total number of the
primary and satellite controllers.
Figure 31: Diagnostics screenshot
Summary of Contents for ZDClink Luxor SATlink
Page 39: ...39 Notes ...
