27
Controller Linking Setup
Connecting Satellite Controllers
1. Disconnect power to primary and satellite controllers.
2. Insert one end of the Cat 6 cable into the Linking Port of the
primary controller.
Figure 28: Primary controller
3. Insert the opposite end of the Cat 6 cable into the Linking
Port of desired satellite controller.
Figure 29: Satellite controller
4. If the site requires multiple satellite controllers, insert a new
Cat 6 cable into the unused Linking Port of the previous
satellite controller.
5. Insert the opposite end of the Cat 6 cable into the unused
Linking Port of the next satellite controller.
Figure 30: Satellite controller
6. Continue this connection method until all satellite units are
installed in series with the primary controller.
Summary of Contents for ZDClink Luxor SATlink
Page 39: ...39 Notes ...
