Lumascape ZDClink Luxor SATlink, Owner'S Manual

Page: 25 / 40

Disable
The Disable option shuts down all lighting events in the Manual
and Program modes regardless of time or status, indefinitely.
This mode does not turn off the unit. Instead, it suspends all
lighting events until the user decides to reactivate. The lights will
remain off after a reactivation is executed and will not turn back
on until the next event (program or manual) occurs.
1. The Disable feature is accessed from the Setup screen.
2. When Disable System is selected, the unit will immediately
shut down all luminaires in Programs , Manual, or Themes .
3. All lights will remain off and the lights will not reactivate until
Disable System is deselected. If in the Off state and a manual
event is initiated, it will run until finished or another Disable
System is performed.
4. The Home screen will show Off in place of the current time
when the unit is shut down.
Figure 26: Shutdown screenshot
25
Operating the Controller
Figure 27: Home screen in disabled mode