Lumagen Radiance Pro 424 Series, Owner'S Manual

Page: 39 / 48

Section 10 - Miscellaneous Commands
Copyright 2007-2017 Lumagen, Inc Radiance Pro, Rev 071719 36
Undo
Revert to the configuration over-written by the last SAVE command. Repeating the Save Undo command
toggles between the last two saved configurations. The command is:
MENU → Save → Undo → OK
Restore from Internal Backup memory
During calibration, the video technician can save the resulting Lumagen configuration to a special
configuration memory. This command restores that configuration. A
SAVE is required to make the restore
permanent. The command is:
MENU
→
Save
→
Restore Backup
→
OK
Load Factory Settings
Set all parameters to factory defaults. A SAVE is required to make this “ Factory Reset ” permanent. The
command is:
MENU 0 9 9 9
Or MENU → Save → FactoryReset → OK