Section 5
–
Basic Commands
Copyright 2007-2017 Lumagen, Inc Radiance Pro, Rev 071719
13
Status Screen
Pressing “
OK
”
when the menu is off displays an on-screen information message as shown in the example below.
Radiance Pro Info Pg 1 (for Pg 2 press Ok)
SW Rev.xxxxxx Serial:xxxxxxxxx
Input 1A Out1 Out2
Mode: 480i 1080p 1080p
Rate: 59.94Hz 59.94Hz 59.94Hz-2D
Format: YCbCr 422 RGB RGB-SDR709
HDCP: 1.x 1.x 2.x
Pressing
“OK”
when the information screen is displayed, will display several additional status screens.
NOTE:
The OK button is equivalent to the RS-232 <cr> character (carriage return). Sending a <cr>
character after a command that does not explicitly require it is treats it as a separate command
and will bring up the status screen. When using RS-232 control do not send a <cr> unless it is
required by the command being sent. If the control code has been written such that
unnecessary <cr> characters are being sent you c
an disable this “Status on <cr>” feature by
entering
MENU 0927
and doing a Save.
On-Screen Help
Pressing, “
HELP
”
when the menu is displayed, displays on-screen help information, for the currently highlighted
menu item, for many of the menu options. Additional information is displayed which can enhance your
understanding of the settings and choices.
Quick Keys
Provides a menu to use for basic remotes that have limited buttons, The ‘Quick Keys’ menu has buttons for input
aspect ratio (4:3, LBOX, 16:9, 1.85, 2.35, NLS), set zoom (Zoom+, Zoom-) and select the user memory (MemA,
MemB, MemC, MemD). The “Quick Keys” menu duplicates the function of pressing the corresponding buttons on
the Lumagen remote. There are also buttons to control 3D (off, SbyS, TopB).
MENU
→
Quick Keys
→
(4:3, LBOX, 16:9, 1.85, 2.35, NLS, Zoom+, Zoom-, MemA, MemB,
MemC, MemD, ‘3D’Off, ‘3D’Sbys, ‘3D’TopB)
