Section 6
–
Video Output Menu
Copyright 2007-2017 Lumagen, Inc Radiance Pro, Rev 071719
19
Graybar Intensity
Some degree of burn-in can occur on any susceptible CRT or plasma display, and even LCD displays. You can
minimize burn-in by setting the bars, on the sides and top/bottom, of the image to a grey color. The default is
“0”
for black. The command is:
MENU
→
Output
→
Styles
→
[Style]
→
Graybar
Soft Edge
Rolls-off the outside edges of the video toward black. This gives movies a bit more of a theater look and can
mitigate overscan issues at the edges of the screen. It can make the edges of a projected image less visible on the
screen masking.
The command is:
MENU
→
Output
→
Styles
→
[Styles]
→
Soft Edge
Style Label
You can change the Style memory labels. Use the
and
buttons to highlight a letter. Use the
and
buttons
to change the letter. Capital letters, small letters, numbers, symbols, and blank are available. The command is:
MENU
→
Output
→
Styles
→
[Styles]
→
Label
Misc. Output Settings
3D Output Options
By default
, when set to “Auto”,
the display’s 3D c
apability is automatically detected using its EDID information.
However, some 3D displays do not properly report their 3D capability in their EDID. This command allows the 3D
output capability to be manually set. The command is
MENU
→
Output
→
3D Options
→
Output List
→
(Auto, Yes, No)
Copy Output Settings
This command copies the current output Mode/CMS/Style settings to the selected output Mode/CMS/Style. The
command is:
MENU
→
Output
→
Copy
→
OK
