8
after shutdown. This also applies when the engine is idling.
Warning!
Risk of fire. Petrol and petrol vapours are highly flammable. Remember the fire, explosion and inhalation
risks involved.
Warning!
Fire risk. The engine must have been shut down and allowed to cool for 10 min before fuel is added.
Always shut down the combustion engine when you leave the operator station, even if just for a short time, to deal
with sawn wood or perform maintenance.
When the machine is not in use, for example at the end of a shift, release the saw blade strain
Warning!
Short circuit. Perform regular checks to ensure that the battery cables are not damaged. Make sure that
no metal parts come into contact with the battery terminals.
Long-term storage
The band saw blade should be taken out of the machine, coiled, secured and stored in a safe, dry place that is not
accessible to children or other persons even during short periods of non-use.
Before next use, the bandsaw blade should
be checked for damaged teeth and cracks;
When stored for longer periods the following applies:
- empty the fuel tank and coolant reservoir, - remove the bandsaw blade from the machine, - close the fuel valve, - lock
the saw carriage in position. Store the bandsaw mill in a place that is not accessible
to children or other persons, preferably in a locked room.
Only store the machine in the place with a condition temperature at 25 to +55
°
C
Only transport the machine in weather conditions at 25 to +55
°
C
Maintenance
Warning!
Before performing servicing or maintenance on the machine: - remove the spark plug on the engine or
unplug the electric cable of the motor.
Warning!
Risk of burn injury. The engine and its silencer become very hot both during operation and after shutdown.
Allow the engine and silencer to cool before performing servicing or maintenance on the machine.
Warning!
Never try to dismount the fixed guard! The fixed guard can be only dismounted by the manufacturer for
maintenance (replace saw band or belt etc.) or cleaning.
Moving the bandsaw mill
Warning!
Risk of entrapment. Keep persons and animals outside the 5 m hazard area around the machine when
lifting and moving machine parts. Secure the load during transport.
The saw carriage and rail component must not be lifted or transported while assembled, but must be transported
separately.
Lifting the saw carriage:
Lift the saw carriage using the lifting points right at the top.
Weight, see Technical data.
Lifting the rail component
:
Use pallet forks or a fork lift to lift the rail from below. Place a protective layer of wood
material on the forks before lifting. Make sure that the rail component is well balanced and secure the load to the pallet
fork before transporting it. Weight, see Technical data.
SAWMILL ASSEMBLY
Summary of Contents for BSW66GL
Page 2: ......
