25
RUN YOUR SAWMILL
Model # PBS26G
, start the engine (refer to the engine manual), then push the throttle handle and the guiding-wheel
locking handle down completely, and then pushes the cutting head to the log/cant slowly.
Model # PBS26E,
1.
Connect the electric cable.
electric supply tolerances: 400V±5%, 50±1%Hz;
The circuit breaker (10A) with RCD module (30mA) shall be installed for supplying electric power to this machine,
in order to protect people against electrical shock due to indirect shock.
2. Turn on the twist switch
3. Hold the handle for the micro switch showed at above picture. (During cutting, DO NOT release the handle, once you
release it, the motor will stop.)
3. Push the bottomswitch“ON” to start the motor
4. Hold both the Micro-switch handle and the lock-pin handle. Then push the cutting head slowly to the log.
Summary of Contents for BSW66GL
Page 2: ......
