10
Assemble log dog pieces as shown below and use waterproof grease on threaded handle and “T” handle. Attach
assembly to the track using the provided nuts & bolts and tighten.
Attach log dog assembly to track as shown above with the 4 nuts and bolts provided. Note that there are various
locations along the track where this assembly can be bolted. Depending on how many track sections are being used,
select a log clamp position that will secure the log firmly against the log supports.
Insert log supports into track cross supports and secure with “T” handles. The “T” handle threads should be coated with
waterproof grease. The sawmill includes two sets of log supports – a short set and a long set. The longer set is ideal for
larger logs and the shorter set is ideal for small logs and square cants.
#4 – CARRIAGE ASSEMBLY
Clamp for
large log
Clamp for small
logs & cants
Summary of Contents for BSW66GL
Page 2: ......
