IRS31Pro-UMB
Operating Manual V10 / 01.2020
G. Lufft Mess- und Regeltechnik GmbH
43
Déclaration d'exposition aux RF
Cet appareil est conforme aux limites d'exposition aux radiations ISDE définies pour un environnement
non contrôlé car il répond aux 2.5.2 Limites d'exemption pour l'évaluation de routine - Évaluation de
l'exposition RF pour mobile / fixe comme défini dans RSS-102.
16 Disposal
16.1 Inside the EU
In accordance with the European Union guideline 2012/19/EU, Lufft takes back old devices within the
member countries of the European Union and disposes of them in an appropriate way.
For further information on the return procedure, please contact your local sales contact. You will find the
addresses of all sales partners in the internet on "www.lufft.com". Please take into consideration also the
national implementation of the EU guideline 2012/19/EU of your country.
16.2 Outside the EU
Please comply with the applicable regulations for the proper disposal of waste electrical and electronic
equipment in your respective country.
17 Repair / Corrective Maintenance
Please arrange for any faulty equipment to be checked and, if necessary, repaired by the manufacturer
exclusively. Do not open the equipment and do not under any circumstances attempt to carry out your
own repairs.
In matters of guarantee or repair please contact:
G. Lufft Mess- und Regeltechnik GmbH
Gutenbergstraße 20
70736 Fellbach
Postfach 4252
70719 Fellbach
Germany
Phone: +49 711 51822-0
Hotline: +49 711 51822-52
Fax: +49 711 51822-41
E-mail:
or your local distributor.
17.1 Technical Support
Our hotline is available for technical questions via the following e-mail address:
You can also consult frequently asked questions at
www.lufft.de
(Menu header: Support
FAQs).
For support questions, please read the configuration of the sensor with the UMB Config Tool and store it
on disk. Include the saved configuration in your support request.
