Model 3001 Multi-Detector Survey Meter
User’s Manual
Section 5
Ludlum Measurements, Inc.
Page 5-1
April 2017
Datalogging Option
The datalogging feature of the Model 3001 allows the user to log radiation
readings with the use of a handle-mounted LOG button. Data can be
logged in any of the Model 3001’s operational modes (RATE, MAX, and
COUNT). Up to 1000 data points can be taken and stored internally.
Depending on the chosen Datalogging Mode, the user can quickly save
logged data using a single Location ID, or select from up to 250 stored
Location IDs. A Real Time Clock (RTC) is utilized to time and date stamp
each datalog entry.
The saved log data and stored location IDs can be viewed, downloaded, and
erased using the LMI Lumic software kit, which includes a USB cable.
Editing of datalogging parameters and RTC via setup mode on the
instrument is disabled.
Setup of the datalogging parameters is also done through the LMI Lumic
software. The advanced user or administrator can set:
Datalogging Mode
Real Time Clock (RTC) Values
Location IDs
Section
5
