Model 3001 Multi-Detector Survey Meter
User’s Manual
Section 4
Ludlum Measurements, Inc.
Page 4-3
April 2017
Default Device SetupFirmware Values
(continued)
Setup Parameter
Default
Value
Notes
P4-6
Backlight Threshold
LO
Most Sensitive
P4-7
Sigma Audio
OFF
Disabled
P4-8
Dual Level Audio
OFF
Disabled
P5-1
Datalogging Mode (optional)
Note:
These options are not editable
through the Device Menu. They can only be
manipulated when connected to Lumic
Software.
1
Mode 1
P5-2
RTC Month
1
P5-3
RTC Day
7
P5-4
RTC Year
14
2014
P5-5
RTC Hour
16
24-hour format
P5-6
RTC Minute
30
P5-7
RTC Second
00
Entering Setup Mode
To enter Setup Mode, power down the Model 3001, then turn the unit back
ON. Following the display of the Firmware version, when the instrument has
begun normal operation, tap the MODE button three times (within four
seconds) to enter Setup mode.
Note:
This process is different if you are in Sigma Audio Mode, rather
than in the “click” Audio Mode. While trying to enter Setup
Mode with Sigma Mode enabled, once the screen displays the
firmware number and then begins the Sigma countdown, press
the Mode button three times. Do not wait until the countdown
is complete, which will prevent you from getting into the Setup
Mode. There is no countdown for the “click” Audio Mode.
Entry to Setup Mode can be confirmed when the numeric portion of the display
shows
-1
, indicating Detector 1 parameters will be shown. To select another
detector, tap the DETECTOR button. To view or edit the selected detector’s
settings, tap the UNITS button to advance to
Setup Page Selection
. The
