Model 3001 Multi-Detector Survey Meter
User’s Manual
Section 4
Ludlum Measurements, Inc.
Page 4-6
April 2017
Setup Page Selection
: Once the Model 3001 is in Setup mode, the Setup Page
selection will be displayed on the LCD, and the Page number will be blinking,
indicating it as the selected item. The number of available parameters per Setup
Page will be displayed using the graph — the number of segments indicating the
number of parameters. Tap the MODE button to choose the Setup Page. Once
the desired Setup Page is shown, tap the UNITS button to move to the first
parameter of that Setup Page. Pressing the UNITS button will to the
Detector
Page Selection
.
Figure 12: Setup Page Selection display (showing page 4).
Long-pressing the UNITS button, no matter what parameter is shown, will first
return the user back to the
Setup Page Selection
screen. Pressing and holding
the UNITS button in
Setup Page Selection
will return to
Setup Detector
Selection
. If the UNITS button is then held down for about 5 seconds, the
display will exit the Setup Mode.
The list below shows the four setup pages and the parameters, in order, on each
page.
Model 3001 List of Parameters (in order)
Page 1 (P-1)
Calibration Constant Mantissa
Calibration Constant Exponent
Dead Time Correction 1
Dead Time Correction 2 Mantissa
Dead Time Correction 2 Exponent
Efficiency
High Voltage Setting
Pulse Threshold