manualshive.com logo in svg

Ludlum Measurements 702i, Manual

Share
Download
Ludlum Measurements 702i Manual Download Page 52

Model 702i and 711i 

Technical Manual

 

Section 9 

 

Ludlum Measurements, Inc.

 

Page 9-11 

December 2018 

Capture Time 

The capture time setting determines the default for run time for the 

Identify

 operation.  

You can either change the default time here, or increase or decrease the time from the 

Identify

 screen itself. 

Dose Rate Scale 

This setting changes the preference for the display of dose rates.  There are four options: 

rem/hour, mrem/hour, nSieverts/hour, and 

Sieverts/hour. These are abbreviated on-

screen.  All dose rates are stored internally in the same units, so this has no effect on 

stored data, but only on the way it appears on the display.  When viewing the full 

Administrator

 menu, you will see that the dose level settings also change to match the 

currently selected unit value. 

Language 

This allows you to select among different user interface languages.  Full support for 

languages other than English may require an upgrade package. Consult factory for 
details. 
 

Help Menu 

The 

Help

 menu provides in-system help for many of the features described in this manual.  Each 

item in the menu is a separate help topic that can be read using a scrolling help viewer.  A typical 

Help

 menu is shown in Figure 25. 

 

 

Figure 25 - 

Help Menu

Summary of Contents for 702i



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands