Chapter 3 Configuring the OC-3 Mode Ports and Channels Using the Console
Accessing the Channelized OC3 STS1 Port Configuration Window
3-16
255-700-714R11.0
PacketStar
®
PSAX 1-Port Channelized OC-3/STM-1 CES Module User Guide
, Issue 1
Release 11.0.0
Accessing the Channelized OC3 STS1 Port Configuration
Window
Begin
Configuring a Port with One Channel, Part 2 (Accessing the Channelized OC-3 STS1 Port Configuration Window)
1
From the Channelized OC-3 Port Configuration window (see
Figure 3-8), select the
Configure STS1 Virtual Port 1
command. The
Channelized OC-3 is displayed in Figure 3-10. Table 3-6 describes the
commands on the window. Table 3-7 describes the display only fields on
the window.
2
Remain on this window and continue with the next procedure.
End
J2 Trace
Default:
Disabled
Range: N/A
Specifies whether the J2 Trace feature is enabled or disabled
for this port.
Disabled
Indicates the J2 Trace feature is disabled.
Enabled
Indicates the J2 Trace feature is enabled.
Table 3-5. Channelized OC-3 or STM-1 CES Port Configuration Window Field Descriptions (Continued)
Field Name
Field Value
Description
Figure 3-10. Channelized OC-3 STS1 Port Configuration Window
