The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Programming the Options
Page 7-5
7
Selecting Ringing Preference
(for a Second Incoming Call)
You can select one of the following types of rings for an incoming call while you
are busy on another call.
■
No Ring
■
One Ring
■
Continuous Ringing
NOTE:
Ringing preference may also be set at the switch, and this switch
setting may override the selection done at the voice terminal.
To select ringing preference (No Ring, One Ring, or Continuous Ringing):
1. While on-hook, press
or .
■
The light next to
or
goes on.
2. Press .
■
The light next to
or
goes off.
3. Enter the 2-digit code, “74” (“RG”).
■
The light next to
or
flutters.
■
The current setting (NO RING, ONE RING, or CONTINUOUS
RING) is shown on the display, if there is one.
4. Press one of the following options:
— Press “0” for No Ring
— Press “1” for One Ring
— Press “2” for Continuous Ringing
or if the voice terminal has a display, press
to move to the next
setting shown on the display screen. Press
to save the desired
option and then exit programming.
Feature
Shift
Feature
Shift
Mute
Feature
Shift
Feature
Shift
*
#
