The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Programming the Options
Page 7-3
7
Enabling/Disabling the Speakerphone or Speaker
(or Changing to a Listen-Only Speaker)
NOTE:
The 8403, 8405B, and 8405D voice terminals are equipped with a 1-way,
listen-only speaker that can be enabled or disabled; these voice terminals
CANNOT be optioned for a 2-way speakerphone.
To enable or disable the 2-way speakerphone or the listen-only speaker, or
to change the 2-way speakerphone to a 1-way, listen-only speaker:
1. While on-hook, press
or
.
■
The light next to
or
goes on.
2. Press .
■
The light next to
or
goes off.
3. Enter the 2-digit code, “77” (“SP”).
■
The red light next to
flutters.
■
The current setting (ENABLE SPEAKERPHONE or ENABLE ONE-
WAY SPEAKER or DISABLE SPEAKER) is shown on the display, if
there is one.
4. Press one of the following to change the current setting:
— Press “1” to enable the 2-way speakerphone
(This setting
cannot
be used with the 8403, 8405B, and 8405D)
— Press “2” to enable the 1-way speaker
— Press “3” to disable the 1-way speaker or the 2-way speakerphone
or if the voice terminal has a display, you may choose to press
to change the setting. Press
to save the desired option and then
exit programming.
■
After pressing “1,” “2,” or “3”
or
pressing “#”, one of the
following voice terminal responses occurs:
If the voice terminal saves your selection, the first three green
call appearance lights go on and, if you have a display, a
confirmation message is displayed.
If the voice terminal cannot save this selection, the first three
red call appearance lights go on and, if you have a display, an
error message is displayed. In this case, the selected option
will be in effect until power is removed from the set. If this
happens, try repeating the process. If the option still cannot
be saved, the terminal may be faulty.
Feature
Shift
Feature
Shift
Mute
Feature
Shift
Speaker
*
#
