The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Switch Administration
Page 5-16
Administering the 8405, 8410, and 8411 Voice Terminals
5
*
A
standard feature button should be administered, if access to System
Directory is provided. It is also desirable for a
standard feature button to
be administered. This feature is NOT available on a DEFINITY G2 or System 85.
†
This feature is available only on a DEFINITY G3V2 (or later) switch.
‡
This feature can be used ONLY on a DEFINITY G3V3 or later. Also, note that after you
press the softkey under the VuStats feature (Stats), the statistics information will remain
on the display for only approximately five seconds before it is overwritten by the softkey
menu. In order to continuously display the statistical information, you should administer
this feature on one of the call appearance/feature buttons instead of administering it as
a softkey feature.
** When administering the Wait feature, use “-w”; when administering the Stop feature,
use “-W.”
†† This feature CANNOT be administered on a DEFINITY G2 or System 85.
Last
Last Number Dialed – Automatically redials the last
extension or outside number you dialed
RingOf
Ringer Off – Turns the ringer off on your voice terminal
(however, you will hear a half-ring whenever a call
comes in to your voice terminal)
SAC
Send All Calls – Temporarily sends all your calls to the
extension of a person designated by the system manager
SFunc
AD Special Function – Insert one of the AD Special
Functions (such as Pause, Mark, or Wait) by pressing a
dial pad key that corresponds with that function
Spres
AD Special Function Suppress – Suppress numbers
on an AD button, such as numbers needed for a
password so they are dialed but not shown on the screen
Stats
‡
ACD View Statistics – Logged-in ACD agents can view
their own ACD measurements
Stop
**
AD Indefinite Wait or Stop – A Stop or Indefinite Wait is
included in an AD number, so that all action is stopped
until a dial tone is received from the switch
View
††
View Stored Number – Allows you to check the number
stored on an AD button or in an AD list
Table 5-8.
Alternate Softkey Features on the 8405D, 8405D Plus, 8410D,
and 8411D — Continued
Call Display
Next Display
