The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Switch Administration
Page 5-3
Circuit Packs Used for the 8400-Series Sets
5
Circuit Packs Used for the
8400-Series Sets
The following circuit packs can be used with all of the 8400-Series sets.
A Note on Bulk Administration and on
LABELMASTER
All the 8400-Series voice terminals can be used with LABELMASTER, Issue 3.1
and later.
The sets can be bulk-administered with the following (all allow aliased support
only):
■
G3MA (used with G1, G3, G3V2, G3V3, and GD’91)
■
SATPC (used with System 75 and International System 75)
■
MGR IV (used with G2.1 and G2.2)
■
CSM, MAAP (used with System 85)
*
G3V3 will support the 8403, 8405, 8410, and 8434DX voice terminals in the
Native Mode with the TN754 V11 or later packs. G3V3 with TN754 V10 and
earlier packs must alias these terminals as 7400-Series terminals.
Table 5-1.
Circuit Packs for the 8400-Series Voice Terminals
Circuit Pack
2/4-Wire
Will Support These Switches
TN2181 – 16-port
2-wire
G3V2, G3V3 or later
TN754B – 8-port
4-wire
All switches except System 85
TN754
*
– 8-port
4-wire
All switches except System 85
TN413 – 8-port
4-wire
International System 75
SN270 or
SN270B – 4-port
4-wire
System 85 R2V2 – R2V4
