Lucent Technologies PARTNER Endeavor 362 Programming And Use Manual Download Page 341

Page: 341 / 407

Troubleshooting

6-10

Problems with System Phones

System Phone Does Not Ring

Possible Cause 1:

Ringer volume is set too low.

What to do:

Press the volume control button while the phone is idle and the

handset is in the cradle.

■

If the phone rings increasingly louder, the problem is solved.

■

If the phone still does not ring, go to Possible Cause 2.

Possible Cause 2:

The Do Not Disturb or Call Forwarding feature is turned on.

What to do:

Check to see if Do Not Disturb or Call Forwarding is turned on.

■

If Do Not Disturb or Call Forwarding is turned on, turn it off.

■

If Do Not Disturb or Call Forwarding is not turned on, go to Possible Cause
3.

Possible Cause 3:

Line Ringing is programmed for No Ring or Delayed Ring.

What to do:

Check the Line Ringing setting for the extension.

■

If Line Ringing is set for No Ring or Delayed Ring, change the setting if
appropriate.

■

If Line Ringing is set for Immediate Ring and this phone is part of a
combination extension, see ‘‘Problems with Combination Extensions’’
on page 6-21.

■

If Line Ringing is set for Immediate Ring and the phone is on an extension
by itself, go to Possible Cause 4.

Possible Cause 4:

Phone is faulty.

What to do:

Unplug the cord from the base of the problem phone. Then plug the

cord into a phone that you know rings properly.

■

If the replacement phone rings properly, the problem phone is defective.
Call the hotline to arrange for a replacement.

■

If the replacement phone does not ring properly, call the hotline.

Summary of Contents for PARTNER Endeavor 362
























































































































































































































































































































































































































Search results

Summary of Contents for PARTNER Endeavor 362

Reviews:

Related manuals for PARTNER Endeavor 362

Brands by name

Popular brands

Lucent Technologies PARTNER Endeavor 362, Programming And Use Manual

Search results

Summary of Contents for PARTNER Endeavor 362

Reviews:

Related manuals for PARTNER Endeavor 362

Brands by name

Popular brands