255-700-467
6-9
PacketStar
®
PSAX 4-Port Voice 2-Wire Office Module User Guide
, Issue 1
Release 9.0.0
Chapter 6 Configuring Interfaces Using the AQueView EMS
Correcting Errors When Applying an Interface
Begin
1
From the Device Menu on the Device window, select Device > Search
Interfaces by Name.
The Interface Search By Name window appears, displaying all existing
named interfaces (see Figure 6-2).
2
To display the interface characteristics, do either a or b:
a
Select an interface from the list, right-click the mouse, and select
Open this interface from the menu that appears.
The corresponding Interface Configuration window is displayed.
b
Type the interface name in the Please Enter Name of the Interface
field, and press Enter.
If the interface exists on the PSAX device and you typed the name cor-
rectly, then the corresponding Interface Configuration window is dis-
played. Otherwise, an error message appears.
End
Correcting Errors When Applying an Interface
An error may occur when you apply an interface to channel.
•
Entering field values that are outside of the configurable range of values
•
Attempting to configure an interface for a port or channel that has already
been configured
•
Attempting to configure an interface that is already in service (must be out
of service to be configured or change field values)
Figure 6-2. Interface Search By Name Window (Displaying Menu)
