Chapter 5 Configuring Ports and Channels Using the AQueView EMS
Configuring the Module
5-8
255-700-467
PacketStar
®
PSAX 4-Port Voice 2-Wire Office Module User Guide
, Issue 1
Release 9.0.0
The Channel Configuration page appears (see Figure 5-6).
The buttons on this window have the following functions:
2
In the Channel Configuration page, either click the arrow in the Interface
Type field (in the middle of the window), or double-click the channel in
the Interface Type field.
3
Select CircuitEmulation in the Interface Type field.
The Circuit Emulation Interface Configuration window appears.
4
Click Apply to Selected.
End
Figure 5-6. Channel Configuration Page
Button
Function
Apply to Selected
Applies the configuration field value you set.
Close
Closes this window.
