ORINOCO WavePOINT-II - Getting Started
2-5
Installing the WavePOINT-II AP - Hardware Installation
You will need these numbers later to identify the unit when running the
AP Manager (Access Point Manager) program.
A form for recording this information is provided in Appendix B
”WavePOINT-II AP Start-up Configuration”.
The Serial Number and MAC Address of the WavePOINT-II AP are printed
on a small label at the top right side of the processor module as pictured in
Figure 2-1.
Figure 2-1
WavePOINT-II AP Identification Label
For ORiNOCO PC Cards, this information is printed on a small label at the
back side of the PC Card.
The Ethernet MAC address is used to identify the WavePOINT-II AP device
on the network.
