Verifying Connectivity
Issue 1 August 1996
37
Data Refreshes
You can verify that the Proxy Agent is connected to the PBX while Fault
Management is running by refreshing the PBX data.
Fault Management can refresh PBX data only if the Proxy Agent is
connected to the PBX. Therefore, if a refresh fails, the Proxy Agent may
have lost contact with the PBX.
Refreshing Data Manually
Use the following steps to refresh data manually:
1. Access the Switch View screen.
2. Select one of the following options from the menu bar:
■
Fault
, then select
Refresh Bulletin Board
■
Fault
, then select
Refresh Alarms and Errors
■
Configuration
, then select
Refresh Configuration Data
The MIB
You can verify that the Proxy Agent is connected to the PBX by viewing the
status of the g3connectState field in your MIB.
To access the g3connectState field, follow these steps:
1. Starting on your configuration map, select the DEFINITY icon for the PBX
that you want to check.
If …
Then the
connection is …
The refresh succeeds
Up
A pop-up window displays a message stating
that the refresh has failed
Down
