Before You Begin
8
Issue 1 August 1996
Requirements for Fault
Management Installation
For Fault Management to be installed and to run properly, your NMS must
be set up with the following:
■
IBM NetView 4.1
■
An IBM AIX workstation which meets all hardware requirements
■
The AIX 4.1 operating system
■
A 1/4-inch tape drive
■
20 Mbytes of random access memory
■
At least 30 Mbytes of free space on the hard drive
Certification
Fault Management is designed to run on the AIX operating system. Lucent
Technologies does not explicitly certify any hardware, but does support
Fault Management on any hardware that is certified by IBM.
