Wall Installation
3. Installing the Telephone
905 Telephone User’s Guide
503-802-100 (Issue 2 August 1998)
21
6
Reattach the reversible wedge by inserting the tabs into
the slots on the bottom of the base. Push down on the
thicker end until the wedge snaps firmly into place.
7
After the reversible wedge is reattached, feed the
remaining line cord back into the rectangular opening,
leaving about three inches free.
8
Plug the other end of the telephone line cord into the wall
jack.
9
Position the telephone so that the mounting knobs on the
wall jack fit into the holes on the bottom of the reversible
wedge as shown in the following illustration.
Note:
If the wall jack is not equipped with the mounting
plate with mounting knobs, you can order one. See
Appendix A "Ordering Information" for details.
Align Slots with Wall Jack Mounting Knobs
Note:
For wall installations not utilizing a wall jack, use the
template provided on the inside back cover of this guide
to help you position mounting screws. Route line and
power cords in a manner appropriate to your installation.
10
Gently pull down on the telephone until the telephone
locks into place.