Wall Installation
3. Installing the Telephone
905 Telephone User’s Guide
503-802-100 (Issue 2 August 1998)
22
Connecting the
Power Cord
Follow these steps to connect the power cord.
1
Plug the power cord into the jack labeled POWER on the
top of the base.
2
Plug the AC adapter that is on the other end of the power
cord into a standard electrical outlet as shown in the
following illustration.
Plug AC Adapter into Standard Electrical Outlet
!
CAUTION:
Use only the AC power adapter supplied with the telephone.
Telephone Power Supply, Class 2, Model No. R75B-1.
Input: 120 V AC, 60 Hz, 6W.
Output: 7.5 V DC, 700 mA.
Adjusting the
Base Antenna
Position the base antenna so it is fully upright.
Charging the
Handset Battery
Pack
Place the handset face-down in the base. The
CHARGING/HANDSET IN USE light on the base turns on to
indicate that the handset is in the right position to charge the
battery pack.
Allow the battery to charge fully (approximately 4 hours)
before using the Business Cordless 905 telephone.
