Lucent Technologies 8528T User Manual Download Page 21

Page: 21 / 93

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

HOLD

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

To put a call on hold while you answer another call

NOTE:

The green light is flashing beside the call appearance button of

the incoming call.

Press

cbbbbbbc

bbbbbb

Hold

The red light goes off, and the green light flutters (next to the call
appearance button of the held call).

Press the call appearance button of the second call.

The red light goes on, and the green light goes on steadily.

You are connected to the second call.

NOTE:

If you put a conference call on hold, the other parties remain

connected.

To return to the held call

Press the call appearance button next to the held call.

The red light goes on, and the green light goes on steadily (next
to the call appearance button of the previously held call).

You are connected to the held call.

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

MESSAGE RETRIEVAL

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

See your System Manager for instructions regarding the message
retrieval procedures for your system.

Summary of Contents for 8528T






























































































Search results

Summary of Contents for 8528T

Reviews:

Related manuals for 8528T

Brands by name

Popular brands

Lucent Technologies 8528T, User Manual

Search results

Summary of Contents for 8528T

Reviews:

Related manuals for 8528T

Brands by name

Popular brands