Lucent Technologies 4ESS SCS, Maintenance Manual

Page: 180 / 526

234-151-077AC TAP-135
1999 June 7, Issue 8 of 8 Page
before board paddle the at reconnected properly are cables coax both that Ensure 35.
proceeding.
to go tested, successfully are SCU all If present. SCUs all for 35 through 26 Steps Perform 36.
37. Step
at terminator 50-ohm the Remove SCCC. the of rear the at cable coax AAP the Reconnect 37.
that Ensure cable. coax AAP the reconnect and 024) EQL (Vertical SCCC the of rear the
board. paddle each to reconnected properly been have cables all
enter: terminal, MTC 1B the At complex(es). SCS the Diagnose 38.
0,SCU DGN:SCS x 10! :PH
where x failed. that SCU(s) all =
pass? 38 Step in diagnosed SCU(s) the Did 39.
If YES and restored are diagnostics to prior service in were that SCU(s) all that ensure ,
continue.
If NO 43. Step to go ,
enter: console, AAP the At database. equipment SCU the Allow 40.
ALL ALW:SCUEQP;KEY
Response:
completed ALL KEY ALW:SCUEQP
LAN. the allow to time appropriate the determine to TAP-137 to Go 41.
42. PROCEDURE. THIS COMPLETED HAVE YOU STOP!
43. TIME. THIS AT COMPLETED BE CANNOT PROCEDURE STOP! level next the Contact
support. of
Proprietary — Technologies Lucent
instructions Company to pursuant Use