Lucent Technologies 4ESS SCS, Maintenance Manual

Page: 167 / 526

TAP-133 234-151-077AC
2 of 1 Page 1999 June 7, Issue
Failure Restore Clear
Use in Disk SCU Stopped
Summary: The
USE IN DISK SCU STOPPED
the by generated was which message output
RST an either in involved is (SCU) Unit Circuit Service the that indicates message input (restore)
INIT disk a or format) (disk COPY these under attempted be not should restore A file). (raw
cleared. is trouble the until shown order the in performed be should below steps The conditions.
an of SCU subject the or copy file inter-SCU an for destination or source the SCU the Was 1.
INIT SCU request?
If NO 2. Step to continue ,
If YES 4. Step to go ,
the retry then status, software unit clear to audits periodic for minutes 15 Wait 2. RST
failure. the generated which message input (restore)
cleared? trouble the Is 3.
If YES 10. Step to go ,
If NO 9. Step to go ,
the Was 4. INIT or COPY error? an by aborted
If YES 5. Step to continue ,
If NO 7. Step to go ,
enter: terminal, (MTC) Maintenance 1B the At 5.
STOP:INIT;SCS a! or STOP:COPY;SCS a!
where a (0-7) number Member =
the Restart 6. INIT or COPY.
the After 7. INIT or COPY the repeat completed, successfully been has RST input (restore)
failure. the generated which message
Proprietary — Technologies Lucent
instructions Company to pursuant Use