20
10.
Tests
The hydraulic units are subject to very high levels of mechanical stress. A visual inspection
must therefore be carried out after every use and at least one visual inspection must be
carried out every six months.
This reveals wear and tear in good time; punctual replacement of these wearing parts
prevents damage to the equipment. Also check regularly that all the securing screws are
tightened (if applicable, observe the prescribed tightening torques).
Every 3 years or when there might be doubts regarding the safety or reliability of the unit, an
additional function check is to be carried out (in this connection, comply with the applicable
national and international regulations with regard to the maintenance intervals of rescue
equipment). Operating time per day In the Federal Republic of Germany, regular safety
inspections according to the regulations of the
G
esetzlichen
U
nfall
v
ersicherung (GUV;
connoted ‘Legal accident insurance’) are mandatory.
ATTENTION!
Clean off any dirt before checking the device!
WARNING / CAUTION / ATTENTION!
To perform inspections, maintenance and repairs, personal safety equipment
appropriate for the work is an absolute requirement. (when necessary also use
screens).
LUKAS offers a suitable test kit for the function test of the hydraulic units.
(For specific details, please consult the LUKAS range of accessories or contact your
LUKAS dealer.)
10.1 Recommended test intervals
10.1.1 General visual inspection
A visual inspection must be carried out after every use, but at least once every six months.
Summary of Contents for P 630 OG
Page 40: ...40 14 EC Declaration of Conformity ...
Page 41: ...41 15 Notes ...
Page 42: ...42 ...
Page 43: ...43 ...
