27
11.3.4 Cleaning and replacing the spark protector
The engine of the P 630 OG comes equipped with a spark protector.
The spark protector must be serviced after every 100 hours of operation
to maintain its intended function.
If the engine has been in operation, the silencer will be hot. Allow the silencer to
cool down before servicing the spark protector.
Removing the spark protector
:
1. Remove the three 5 mm screws from the silencer and remove the silencer protector.
2. Remove the special screw from the spark protector and remove the spark protector from
the silencer.
Cleaning and inspecting the spark protector:
1. Brush off any oil carbon deposits from the spark
protection strainer using a suitable cleaning brush.
Ensure that the strainer is not damaged. Replace the
spark protection if it develops cracks or holes.
2. Assemble the spark protector and silencer
protection in the reverse order.
Screw (3x)
Spark protection
Screw (1x)
Summary of Contents for P 630 OG
Page 40: ...40 14 EC Declaration of Conformity ...
Page 41: ...41 15 Notes ...
Page 42: ...42 ...
Page 43: ...43 ...
