![background image](http://html1.mh-extra.com/html/lts/ptzh213x23/ptzh213x23_installation-manual_1945243012.webp)
Installation Manual of HD-TVI Speed Dome
11
Wall mounting is applicable to the indoor/outdoor solid wall construction. The followings are the
mandatory precondition for wall mounting:
The wall must be thick enough to install the expansion screws.
Please make sure that the wall is strong enough to withstand more than 8 times the weight of
the dome and the mount.
Steps:
1.
Check whether the type of the bracket and the number of accessories are right, as shown in the
figure below.
Figure 2-5
Wall Mount Bracket, Nuts and Flat Washers
2.
Drill 4 screw holes in the wall according to the holes of the mount, and then insert M8
expansion screws (not supplied) into the mounting holes.
Figure 2-6
Drill Mounting Holes
3.
Attach the wall mount to the wall by aligning the 4 screw holes of the mount with expansion
screws on the wall.
4.
Secure the wall mount with 4 hex nuts and washers.
Figure 2-7
Secure the Mount
5.
Install the speed dome to the mount. Please refer to
Section 2.3.4
for
installation details.
Follow the same instructions described above for the short-arm wall mounting. For outdoor