User Manual of Network Camera
72
(1)
Draw the detection area as in the normal configuration mode. Up to 8 areas are
supported.
(2)
Select
OFF
for
Switch Day and Night Settings
.
(3)
Select the area by clicking the area No.
(4)
Slide the cursor to adjust the sensitivity and proportion of object on the area for
the selected area.
(5)
Set the arming schedule and linkage method as in the normal configuration mode.
(6)
Click
Save
to save the settings.
Day/Night Auto-Switch
Steps:
(1)
Draw the detection area as in the normal configuration mode. Up to 8 areas are
supported.
(2)
Select
Auto-Switch
for
Switch Day and Night Settings
.
Figure 6-44
Day/Night Auto-Switch
(3)
Select the area by clicking the area No.
(4)
Slide the cursor to adjust the sensitivity and proportion of object on the area for
the selected area in the daytime.
(5)
Slide the cursor to adjust the sensitivity and proportion of object on the area for
the selected area at night.
(6)
Set the arming schedule and linkage method as in the normal configuration mode.
(7)
Click
Save
to save the settings.