User Manual of Network Camera
32
3.
Click
to finish the setting of the current preset.
4.
You can click
to delete the preset.
Note
:
You can configure up to 128 presets.
Calling a Preset:
This feature enables the camera to point to a specified preset scene manually or
when an event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click
to call the
preset.
Or you can place the mouse on the presets interface, and call the preset by typing
the preset No. to call the corresponding presets.
Figure 5-5
Calling a Preset
5.4.3
Setting / Calling a Patrol
Note:
No less than 2 presets have to be configured before you set a patrol.
Steps:
1.
Click
to enter the patrol configuration interface.
2.
Select a path No., and click
to add the configured presets.
3.
Select the preset, and input the patrol duration and patrol speed.
4.
Click OK to save the first preset.
5.
Follow the steps above to add the other presets.
