25
Do NOT leave any spaces between any of the letters and symbols.
Do NOT put a comma or period in the command.
Do NOT include any
quotation marks in a command; they are used here just for explanation
purposes.
The maximum for text messages is 60 bytes. If you want to send
multiple commands, please do so in separate texts to avoid failure
sending.
An example of a command:
LTL01*1#06*S30#07*10A3Z#62*1#AA
It means to ask the camera to 1. set camera to video mode, 2.set interval
between PIR induction to 30 seconds, 3. set serial number to “0A3Z”, 4.
according to the current mode and send status, immediately shoot and send
to you.
For SMS remote control interval, different value with different
power consumption: “0” the highest and “off” zero.
Camera will reply you message as below format when your SMS
command is in correct format and received:
Message "LTL..." format OK.
SQ10,R1,G1,B3.
Attention: The content in the replied message in quote marks ("…") is the
front part of the SMS command due to message length limitation.
SQ10 means signal strength is 10 (MAX: 31).
R1 indicates the network registration and status: 0: didn’t register the
network and the module didn’t find the operator; 1: registered to the local
network; 2: found the operator but didn’t register the network; 3: the
registration was rejected; 4: unknown data; 5: the registration is in roaming
status;
G1
indicates the status of data network registration, 1 and 5 means the data
network can be used, otherwise means the exception of data network
registration, it cannot be used.
B3~B0 represents for battery level, B3 for high level, B1 for low level, pleas
replace battery as soon as possible when B1.
Table of Command Code
Command
Code
Function of
Command Code
Example
Meaning
01
Camera (0), Video (1),
Video + Snap (2)
01*1#
set to video mode