
8
Getting Started
2.1
Load Batteries
The battery box on the back of the camera can load 6 18650 lithium
batteries.
Please note that the battery polarity should correspond to the
marks on the battery box when installing.
Please follow the positive and negative mark on battery box to
load 6x18650 lithium batteries.
Note: When using the battery case to power the camera, please be sure
to install 6 fully charged 18650 lithium batteries in the battery box.
The camera can use an external DC power supply of output current 2A,
12V~24V to charge the battery in the battery box. It is recommended to use
our company
’
s LTL-SUN-5.5W or LTL-SUN (built-in lithium battery) solar
charger(purchased separately) for long working time. The camera may work
in the field for more than 3 years without replacing battery.
2.2
Insert SD Card
Support 16GB ~ 128GB (Class 10 and above), the genuine SanDisk
or Kingston 32GB SD card (Class 10 or above) are recommended.
Please format the SD card on camera before using it for the first time
Unlock the lock buckles and you will see the SD card slot at the
bottom of the camera, insert SD card as below picture slightly into SD