11
parameters, please refer to the Advanced Settings for better
operation.
Press key to enter press to enter the wireless settings menu,
please refere section 3.3 for details.
In the Test mode, you can test the working area of the IR sensor,
especially the sensing angle and the sensing distance. Do the
following:
First tie the camera to the tree with a strap and aim at the area
you are interested in.
Walk parallel to the camera from one end of the sensing area to
the other. Try different distance and angle to the camera.
If the indicator light is only flashing blue or red when you moving,
indicating that camera will activate in advance at the location of
you. If the indicator light is flashing red and blue at the same time,
it means that the camera will take pictures at your position.
After doing this test, you can find the best shooting position when you
install the camera. In general, we recommend placing the camera at a
height of 3 to 6 feet (1 to 2 meters) from the ground.
2.6
Set up and install the environmental data acquisition
device
External environmental data acquisition device is not included in standard
package, it can be purchased separately. The Ltl Acorn environmental data
acquisition box is a device that collects the temperature, humidity, light
intensity, soil temperature and soil moisture of the surrounding environment.
After it is connected to wireless communication trail camera, it can monitor
environmental changes and record the environment data of temperature,
humidity, light intensity, soil temperature and soil moisture.
Two models available: Ltl-WSD-01and Ltl-WSDTR-01
Ltl-WSD-01
: monitors and collects data of ambient temperature, humidity,
and light intensity.
Ltl-WSDTR-01
: monitors and collects data of ambient temperature, humidity,
light intensity, soil temperature and soil humidity (with soil monitoring probe)