15
Set Clock
Setup
Press the OK button to enter the
submenu of clock setting, the date,time
and time zone can be set according to
the prompts.
Picture No.
01 P
,
02 P, 03 P
Select the number of burst shooting at
per trigger.
Video
Length
Default setting
is
10s
,optional
setting is
‘ Automatic ’
or 2s~60s
Set length of video as required, camera
will start recording video as preset length
after it is automatically triggered in ON
mode and stop recording till preset length
is reached. Set as ‘
Automatic
’, the
length of video triggered in ON mode
will automatically change from range of
5s to 32s. If animal keeps wandering in
the detection range when recording video
in ON mode, the recording will last up to
maximum length of 30s, if animal stop
moving or leave detection range, the
recording will stop.
Interval
1 Min, optional
from 1 second
to 60 minutes
Select the length of time that the camera
will wait from when the last picture was
taken and written on the SD card, to
when it responds to any new triggers. It
prevents the SD card from filling up with
too many redundant images of the same
object, save power and SD card space.
Sense Level
(Sensitivity)
High,
Normal
,
Low, Off
Select the sensitivity of the PIR sensor.
When set to off, the camera will stop PIR
induction shooting; it is usually used
when time lapse (TIME LAPSE) shooting
is turned on (induction shooting and time
lapse shooting can work at the same
time). Higher sense level with longer
sensing distance, but easier to be
interfered. The Normal/Low setting suits
outdoors while the High setting suits
indoors or environment with higher
temperature.
Recommendation: Do not
set the sensitivity to high when the
temperature is below 25
℃
.