13
collecting ambient temperature, humidity, light intensity and soil temperature
and humidity(collects every 5 minutes) and upload the data collected to the
cloud system every 6 hours through the camera. The uploaded data can be
viewed on page Ltl Camera Cloud System -> Environmental Data Analysis.
Attention: The Environment Monitoring only works when the sending
status is set to the Ltl Camera Cloud System and the Environment
Monitoring menu is "ON".
2.7
Automatically Update Camera Time
Automatically update the camera time over the network requires the
camera with SIM card inserted to connect to network.
Connect the external display in ON mode to enter TEST mode, the
wireless module receives the network signal and begins to update and
correct the camera time, after the update is successful, the display shows '
UTC SUCCESSFUL'.
In ON mode, camera starts wireless module to connect to the network at
about 00:13 every day to automatically update and correct the camera
system time.
2.8
Low Power dual PIR Sensor
Turn the switch to ON position, close the camera with the battery box and
fasten the buckles (battery box with 6*18650 fully charged batteries
correctly installed),camera enters the automatic infrared sensing shooting
mode when external display is not connected. After entering this mode,
the red indicator light on the front of the camera will flash 5 times, after the
red light is off, the camera enters the automatic shooting mode. When an
animal or other object enters the sensing range of the PIR, the camera
immediately starts shooting.
Attention: The camera PIR uses the latest induction technology, the
sensing distance is up to 18 meters, when installing the camera, user
must try the best to make camera horizontally facing the distance for
shooting, the installation height is 0.5 to 0.8 meters, do not install the
camera obliquely up or obliquely down, otherwise it will seriously
affect the normal induction shooting of the camera. To avoid potential
false triggers due to temperature and motion disturbances, please do
not aim the camera at a heat source (e.g.: the sun, heated stone or
metal) or nearby tree branches and twigs. The ideal direction to aim at
is the north and the open place without heat source.