LT Security LTN07256 User Manual Download Page 86

Page: 86 / 191

User Manual of Network Video Recorder

Figure 7. 4

Checkup of Quick Export Result Using USB1-1

7.1.2

Backing up by Normal Video Search

Purpose:

The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB writer),

SATA writer and e-SATA HDD.

Backup using USB flash drives and USB HDDs

Steps:

Enter Export interface.

Menu>Export>Normal

Select the cameras to search.

Set search condition and click

Search

button to enter the search result interface. The matched video files

are displayed in Chart or List display mode.

Figure 7. 5

Normal Video Search for Backup

Select video files or pictures from the Chart or List to export.

Click

to play the record file if you want to check it.

Check the checkbox before the record files you want to back up.

The size of the currently selected files is displayed in the lower-left corner of the window.

Summary of Contents for LTN07256
































































































































































































Search results

Summary of Contents for LTN07256

Reviews:

Brands by name

Popular brands

LT Security LTN07256, User Manual

Search results

Summary of Contents for LTN07256

Reviews:

Brands by name

Popular brands