LT Security LTN07256 User Manual Download Page 166

Page: 166 / 191

User Manual of Network Video Recorder

165

Figure 16. 8

User Permission Settings Interface

Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for

the user.

Local Configuration

•

Local Log Search: Searching and viewing logs and system information of NVR.

•

Local Parameters Settings: Configuring parameters, restoring factory default parameters and

importing/exporting configuration files.

•

Local Camera Management: The adding, deleting and editing of IP cameras.

•

Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD property),

upgrading system firmware, clearing I/O alarm output.

•

Local Shutdown Reboot: Shutting down or rebooting the NVR.

Remote Configuration

•

Remote Log Search: Remotely viewing logs that are saved on the NVR.

•

Remote Parameters Settings: Remotely configuring parameters, restoring factory default parameters

and importing/exporting configuration files.

•

Remote Camera Management: Remote adding, deleting and editing of the IP cameras.

•

Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports.

•

Remote Video Output Control: Sending remote button control signal.

•

Two-Way Audio: Realizing two-way radio between the remote client and the NVR.

•

Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote client) and

controlling the alarm output.

•

Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting HDD

property), upgrading system firmware, clearing I/O alarm output.

•

Remote Shutdown/Reboot: Remotely shutting down or rebooting the NVR.

Camera Configuration

•

Remote Live View: Remotely viewing live video of the selected camera (s).

•

Local Manual Operation: Locally starting/stopping manual recording and alarm output of the selected

camera (s).

•

Remote Manual Operation: Remotely starting/stopping manual recording and alarm output of the

selected camera (s).

•

Local Playback: Locally playing back recorded files of the selected camera (s).

•

Remote Playback: Remotely playing back recorded files of the selected camera (s).

•

Local PTZ Control: Locally controlling PTZ movement of the selected camera (s).

Summary of Contents for LTN07256
































































































































































































Search results

Summary of Contents for LTN07256

Reviews:

Brands by name

Popular brands

LT Security LTN07256, User Manual

Search results

Summary of Contents for LTN07256

Reviews:

Brands by name

Popular brands