LT Security LTN07256, User Manual

Page: 145 / 191

User Manual of Network Video Recorder
144
4.
Enter the storage capacity in the text field of Max. Record Capacity (GB) , as shown in Figure 13. 17.
Figure 13. 17 Configure Record/Picture Quota
5.
You can copy the quota settings of the current camera to other cameras if required. Click the Copy button
to enter the Copy Camera menu, as shown in Figure 13. 18.
Figure 13. 18 Copy Settings to Other Camera(s)
6.
Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of IP
Camera to select all cameras.
7.
Click the OK button to finish the Copy settings and back to the Storage Mode interface.
8.
Click the Apply button to apply the settings.
If the quota capacity is set to 0 , then all cameras will use the total capacity of HDD for record.
13.5 Checking HDD Status
Purpose:
You may check the status of the installed HDDs on NVR so as to take immediate check and maintenance in case
of HDD failure.
Checking HDD Status in HDD Information Interface
Steps: