LT Security LTN07256, User Manual

Page: 35 / 191

User Manual of Network Video Recorder
34
Functions Front Panel Operation
Manually switch screens Next screen: right/down direction button.
Previous screen: left/up direction button.
Auto-switch Press Enter button.
Activate right-click menu
On the LCD screen, tap the icon on the lower-left corner of the screen to
pop up the right-click menu.
3.2.2 Using the Mouse in Live View
Table 3. 3 Mouse Operation in Live View
Name Description
Common Menu Quick access to the sub-menus which you frequently visit.
Menu Enter the main menu of the system by right clicking the mouse.
Single Screen
Switch to the single full screen by choosing channel number from the
dropdown list.
Multi-screen Adjust the screen layout by choosing from the dropdown list.
Previous Screen Switch to the previous screen.
Next Screen Switch to the next screen.
Start/Stop Auto-switch Enable/disable the auto-switch of the screens.
Start Recording Start continuous recording or motion detection recording of all channels.
Add IP Camera Enter the IP Camera Management interface, and manage the cameras.
Playback
Enter the playback interface and start playing back the video of the selected
channel immediately.
PTZ Control
Output Mode Four modes of output supported, including Standard, Bright, Gentle and Vivid.
Aux Monitor
Switch to the auxiliary output mode and the operation for the main output is
disabled.

The dwell time of the live view configuration must be set before using Start Auto-switch .

If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when
right-clicking mouse on this camera.
Figure 3. 1 Right-click Menu
3.2.3 Using an Auxiliary Monitor
Certain features of the Live View are also available while in an Aux monitor. These features include:
•
Single Screen: Switch to a full screen display of the selected camera. Camera can be selected from a
dropdown list.